AtlanticGreenPro's wet abrasive blasting process is perfect for residential projects like patios, pools, driveways, garages as well as brick, stone and stucco... Why ? Because our process produces very little dust like dry media blasting such as sand blasting and soda blasting, our machine is compact so it can move around your property without impacting it like other similar processes.


Atlantic
GreenPro's process for restoring just about any surface to like new condition in the residential sector.

Since the creation of our revolutionary process for surface restoration we have been constantly amazed at the results this system produces both indoors and outdoors, the process is extremely clean using a fraction of the media that other systems use all while removing dirt, grime, grease, stains, paint and rust from just about any surface imaginable.

Atlantic Green Pros main focus has been to deliver green surface coating solutions, first with our proven wet abrasive blasting process which utilizes recycled glass media to strip away ugly coating to our recent addition to the Blastrac process which again utilizes recycled steel shot to strip away and profile concrete for new surface coatings.

What type of surfaces does the AtlantcGreenPro system clean? Just about anything.

The AtlanticGreenPro system quickly and safely cleans and removes contaminates like dirt, grease, grime, oils, rust, chemicals including fire damage as well as paint, graffiti and or just any other surface coating from stone, brick, concrete, stucco, portland cement, stamped concrete, aggregate cement, asphalt, composites, fiberglass, steel, aluminum, cast metals, plastic and wood and it does it all with a fraction of the mess that other systems produce leaving your environment and job site clean.


How does our process compare with other cleaning and restoration processes:

AtlanticGreenPro blasting, uses wet abrasive media blasting and recycled glass which 100% environmentally safe. AtlanticGreenPro blasting is done in an open environment, because our process encapsulates the blasting media in a water vapor which all but eliminates airborne dust making for a an extremely clean and fast work space environment. The media AtlanticGreenPro uses is recycled glass, you know the same stuff you put out curbside and is taking away by the recycle collection guys. What's better yet is our product is what the recycling industry would send to the landfill because it's to small to separate by color. What's nice a glass is that it shatters upon impact on the surface instead of smashing into it like sand (Small Rocks)... the benefit is that it scrubs away dirt, grime, rust and paint while not doing any major damage to any of the subsurface. Also tenting isn’t required, but we do it anyway. Also our wet abrasive blasting process use 50 lbs of media per hour where soda blasting and sand blasting require anywhere from between 200 lbs to 500 lbs per hour to achieve the same results leaving a mess afterwards to deal with. Our process is clean, fast and delivers results beyond one’s expectation.

Pressure washing, Pressure washing, uses water and chemical detergents at pressures from between 3000 psi to over 40,000 psi in water jet
blasting. Water and chemical detergents are forced into small places like, cracks and seals compromising and damaging the integrity of the seal which again requires expensive maintenance to fix and repair. Not just that, but most times when dealing with stubborn stains the area being cleaned has to be treated with a spray on solvents or detergents which now contaminates the ground water and surrounding work area. Because pressure washing utilizes high pressure water surfaces such as wood as well as painted surfaces are easily damaged.

Dry Sand blasting, uses a wide range of materials at pressures between 100psi and up to 150psi. Media used includes sand, glass, black beauty, , slag and even metal blast. Traditionally sand blasting is done in a dry environment, meaning there is usually a lot of dust produced. Tenting and a closed work space are required because the dust moves around and coats other objects within the surrounding work area. Sand blasting leaves a layer or dust on whatever surface is being restored and requires another level of cleaning before paint or coatings can be applied. Sand blasting also has a tendency to damage the surface leaving the surface rough and with little debits. Sand blasting also use a lot of media anywhere between 300 lbs to 1000 lbs so with sand blasting there’s a lot more to clean up after words and in many areas the process is all but restricted.

Below and on the right hand side of this web page are areas ideal for our AtlanticGreenPro surfaces restoration process .

Houses and Homes
Brick and stone cleaning
Stamped cement coating removal
Swimming pool paint removal
Paint removal
Stuco cleaning
Wood surface cleaning
Driveway stain cleaning
Garage Floor and Paver cleaning
Flood and Fire damage cleaning
Graffiti Removal

Town Homes
Brick and stone cleaning
Stamped cement coating removal
Swimming pool paint removal
Paint removal
Stuco cleaning
Wood surface cleaning
Driveway stain cleaning
Garage Floor and Paver cleaning
Flood and Fire damage cleaning
Graffiti Removal
Condominiums and Apartments
Brick and stone cleaning
Stamped cement coating removal
Swimming pool paint removal
Paint removal
Stuco cleaning
Wood surface cleaning
Driveway stain cleaning
Garage Floor and Paver cleaning
Flood and Fire damage cleaning
Graffiti Removal

Failed stamped concrete sealer is a big part of what we do.
Our Farrow process safely removes just the failed sealer without damaging the detail layer of the stamped concrete.

FAILED STAMPED SEALER: It's ugly and it's worse when you have company over and they comment on how bad you're stamped concrete looks.

After Atlantic Green Pro Restoration Our proven wet abrasive blasting process is the only know method that safely restores your stamped concrete to like new condition. We also offer the complete package of tinting and resealing.
Before This is an example of FAILED stamped concrete.
After sealer removal Our process safely remove just the sealer leaving the stamped concrete detail layer intact.
After we reseal it We do what is known as antiquing where we repigment the shadows and highlights followed by applying new sealer which brings your stamped concrete back to it's original condition.
Before many FAILED stamped concrete projects are on at homes like this one.
After sealer's removed First we remove the failed sealer and clean the concrete
After resealing We then perform what is known as antiquing where we repigment the shadows and highlights followed by applying new sealer which brings your stamped concrete back to it's original condition.
Before Again this is an example of what happens when you over apply sealer.
After we removed the failed sealerT Here again we removed the sealer and clean the stamped concrete so it's ready for re antiquing and new sealer.
After resealing Here's another angle of the restored stamped concrete surface.
 
Our process also works on wood where we can remove paint from woods even as soft as cedar.
During the restoration Our wet abrasive process prevents dust and paint from becoming airborne
Removing paint from cedar Here you can see the process in action, we use low pressure compressed air along with our Gereen Media (recycled glass) and a small amount of warm water.... as you can see no dust.
Finished painted surface As you can see the details of the wood have been inhanced by removing many years of old paint.
Finished restoration Here is the same house painted and looking new again.
 
Removing Paint from Stone, Brick and Concrete.
This is a recent stone fireplace project we did in a home undergoing a full renovation.
Before Here's the stone fireplace as it looked before the restoration
After Same stone fireplace only the paint is gone.
Before This is what the painted serface of the stone fireplace looked like before the restoration
After Same stones only differance is the paint is gone.
 
We also remove paint, epoxy, carpet and floor tile glue from concrete surfaces
Before We're regularly brought in to projects like this one where epoxy paint as well as carpet and vinyl floor glue have to be removed from concrete surfaces
After This was the same garage floor with both the epoxy paint and the old indoor carpet clue were both removed from the concrete surface.
Before This is what the garage floor looked like after our client removed the indoor outdoor carpet that wason top of a layer of old epoxy paint .
After This is the same garage floor after we removed both the epoxy paint and carpet glue from the concrete surface
After As you can see the area where the restoration took place is as clean or cleaner than when we arrived.
 
Atlantic Green Pro removes iron water stains from pavers, stones, bricks and concrete.
Before Iron water stains on porous pavers is extremely difficult to remove with most any other process... Atlantic Green Pro process does the impossible.
After Atlantic Green Pro's process of dust free wet abrasive blasting we safely remove all the iron water stains  wile leaving the landscaping intact.
 
Atlantic Green Pro safely removes paint and sealers from interior surfaces like brick, stone, concrete and wood.
Before Our client attempted to do this restoration on their own, but after removing 1/6th of the plaster decided to call Atlantic Green Pro to do the job. Our process safely removes paint and sealers from most any interior surface like brick, stone, concrete and wood.
During restoration Containment is critical to any interior restoration process we perform, Sometime wet abrasive blasting isn’t the solution and we have other GREEN methods which successfully remove paint as well.
Finished brick restoration As you can see we do the imposible and exceed our clients expatations
 
Fire Restoration is an area that Atlantic Green Pro has had great success in with our Farrow System as you can see in this next series of before and after images.
Before This was a pretty bad basement fire that produced a lot of heat and soot.
After Atlantic Green Pro was brought in and our Farrow process removed the chard wood from the ceiling and sub-floor support beams as well as the soot and burnt water proofing products from the walls
Before Here you can see the fire damaged wood sub-floor as well as the fire chard support beams
After Here you can see we removed the fire damaged from the wood sub-floor as well as the fire damaged support beams
Before The fire followed the main support for the house down this laminated wood support beam where one half of it had to be replaced do to the fire damage.
After Here you can see that the main laminate support beam as been cleaned of all fire damage as was the sub-floor and wood beams
Before The area coming down the stairs had extensive fire and soot damage.
After As you can see in this image our restoration process removed all the soot and fire damage from the wood.
 

 

 

 

Click on the +1 to like page.

 

Atlantic Green Pro Home

About Atlantic Green Pro


Commercial

Residential

Houses and Homes
Brick and stone cleaning
Stamped cement coating removal
Swimming pool paint removal
Paint removal
Stuco cleaning
Wood surface cleaning
Driveway stain cleaning
Garage Floor and Paver cleaning
Flood and Fire damage cleaning
Graffiti Removal

Town Homes
Brick and stone cleaning
Stamped cement coating removal
Swimming pool paint removal
Paint removal
Stuco cleaning
Wood surface cleaning
Driveway stain cleaning
Garage Floor and Paver cleaning
Flood and Fire damage cleaning
Graffiti Removal

Condominiums and Apartments
Brick and stone cleaning
Stamped cement coating removal
Swimming pool paint removal
Paint removal
Stuco cleaning
Wood surface cleaning
Driveway stain cleaning
Garage Floor and Paver cleaning
Flood and Fire damage cleaning
Graffiti Removal

Municipal and Government

Historic Restoration

Transportation and Highways

Marine, Boats and Marinas


Construction Equipment

Green Clean Press

Contact Atlantic Green Pro

Surfaces Restored

Stone
Brick
Concrete
Portland cement
Stucco
Stamped cement
Asphalt
Steel
Aluminum
Iron
Bronze
Brass
Cast metals
Fiberglass
Composites
Plastics
Wood

Call us at
(609) 217-8494

Click here to send an email
to AtlanticGreenPro


Serving New Jersey, Delaware, Pennsylvania, New York and Maryland

Atlantic Green Pro Home   |   About AtlanticGreenPro   |   Commercial   |   Residential   |   Municipal and Government   |   Historic Restoration
Transportation and Highways   |   Marine, Boats and Marinas   |   Construction Equipment   |   Green Clean Press   |   Contact Atlantic Green Pro