Atlantic
GreenPro's process for restoring
just about any surface to like new condition.

AtlanticGreenPro's revolutionary process for surface restoration has constantly amazed everyone with the results our system produces both outdoors and indoors, because it’s extremely clean and uses a fraction of the media that other systems use to cleans and remove dirt, grime, grease, stains, paint and rust from just about any surface without leaving a mess or damaging the surface being restored.

Recent NBC10 News Coverage:
AtlanticGreenPro cleans cemetery.

How does it work? Simple... Our system uses a low pressure GreenClean product with warm water and air at pressures of between 45psi and 55psi.

Our system doesn't use chemicals of solvents like other similar processes including pressure washing which can damage the surface being cleaned, because it uses water and chemical detergents at pressures of up to 3000 psi.

Not just that, but pressure washing forces water and chemical detergents in to the cracks and in between the bricks, stone and cement... which compromises the structure and damages the bond holding everything together.

Our AtlanticGreenPro process just cleans the surface, because it's done with low pressure!

AtlanticGreenPro process gently restores tarnished brass, bronze and other cast metal monuments to like new condition.

What type of surfaces does the AtlantcGreenPro system clean? Just about anything.

The AtlanticGreenPro system quickly and safely cleans and removes contaminates like dirt, grease, grime, oils, rust, chemicals including fire damage as well as paint, graffiti and or just any other surface coating from stone, brick, concrete, stucco, portland cement, stamped concrete, aggregate cement, asphalt, composites, fiberglass, steel, aluminum, cast metals, plastic and wood and it does it all with a fraction of the mess that other systems produce leaving your environment and job site clean.

AtlanticGreenPro can go in and restore just about any wood surface to like new or original condition.


How does our process compare with others cleaning and restoration processes:

AtlanticGreenPro blasting, uses re GreenClean media which is a natural inert media that is 100% environmentally safe and is applied at LOW pressures between 45 psi and up to 55 psi. Traditionally AtlanticGreenPro blasting is done in an open environment, because our process encapsulates the blasting media in a water vapor which all but eliminates airborne dust making for a an extremely clean and fast work space environment. The media AtlanticGreenPro uses is volcanic glass which shatters upon impact on the surface being restored... scrubbing away dirt, grime, rust and paint while not doing any damage to any other subsurface. Tenting isn’t required, but AtlanticGreenPro will tent if required. Our system use 50 lbs of media per hour where soda blasting and sand blasting require anywhere from 500 lbs to 1000 lbs per hour leaving a mess after words to deal with. Our process is clean, fast and delivers results beyond one’s expectation.

Pressure washing, uses water and chemical detergents at up to 3000psi. Water and chemical detergents are forced into places, cracks and seals compromising and damaging the integrity of the seal which requires expensive maintenance to fix and repair. Not just that, but most times when dealing with stubborn stains the area being cleaned has to be treated with a spray on solvents or detergents which now contaminates the you have ground water and surrounding work area. Because pressure washing utilizes high pressure water surfaces such as wood as well as painted surfaces are easily damaged.

Soda blasting, uses bicarbonate of soda, also known as baking soda and is done at pressures of up to 150psi, Traditionally soda blasting is done in a dry environment, meaning there is usually a lot of dust produced from the blasting medium. Tenting and a closed work space are required because the dust moves around and coats other objects within the surrounding work area. Soda blasting leaves a layer or film on whatever surface is being restored and requires another level of cleaning before paint or coatings can be applied. Soda blasting also leaves a super smooth surface making it difficult for paints and surface coatings to adhere too. Soda blasting requires 500 lbs of media to achieve what 50 lbs of our Farrow GreenClean media produces, so with soda blasting there’s a lot more to clean up after words.

Sand blasting, uses a wide range of materials at pressures between 100psi and up to 500psi. Media used includes sand, glass, soda, walnuts, slag and even metal blast. Traditionally sand blasting is done in a dry environment, meaning there is usually a lot of dust produced just like soda blasting. Tenting and a closed work space are required because the dust moves around and coats other objects within the surrounding work area. Sand blasting leaves a layer or dust on whatever surface is being restored and requires another level of cleaning before paint or coatings can be applied. Sand blasting also has a tendency to damage the surface leaving the surface rough and with little debits. Sand blasting anywhere between requires 500 lbs of media to 1000 lbs of media to achieve what 50 lbs of our Farrow GreenClean media produces, so with sand blasting there’s a lot more to clean up after words and in many areas the process is all but restricted.

Below and on the right hand side of this web page are areas ideal for our AtlanticGreenPro surfaces restoration process.

Buildings
Exterior surface cleaning
Portland cement cleaning
Graffiti removal
Gum removal
Sidewalk cleaning
Paint removal
Road and parking stripe removal
Equipment rust removal
Monuments
Graffiti removal
Monument cleaning
Wood and metal restoration
Fire damaged buildings
Collector Classic Restoration
Auto paint removal
Boat paint removal
Truck paint removal
Large object paint removal
Airplane paint removal

Smithville New Jersey museum home restoration

This is a recent surface restoration project Atlantic Green Pro did to 150 year old cedar house at Historick Smithville Village park. Smithville New Jersey museum home restoration

Before restoration Old white paint on 150 year old cedar home.
During restoration The front of the 150 year old house after we removed the old paint with our Atlantic Green Pro wet abrasive blasting process.
During restoration Atlantic Green Pro removes paint from 150 year old cedar house... note there's no dust.
After: Atlantic Green Pro's wet abrasive process removes multipul coats of paint without producing huge amounts of dust like dry blasting.
During restoration Here you can see the process in action, the process uses recycled glass,,, the same stuff you put out on the curb for recycling, along with a small amount of heated water and compressed air... it's a very green process.
After restoration our process made it easy for the paint contractor to apply new paint on a clean wood surface
After restoration As the house looks all finished
After restoration another angle of the front finished
After restoration Same area as that with the lift.
After restoration This is what the wood looked like after the restoration painted.
 
This is another recent surface restortion project Atlantic Green Pro did inside a Historic Brownstone on the 5th floor.
Exterior of building This project was up on the 7th floor in a back unit of this building. Opperating clean and not disrupting the other residants of this building where critical to the success of this project.
Inside before: The brick wall that was being restored to it's original look had both plaster and paint which had to be removed.
Inside before: A negitive air containment tent was set up to contain everything withing the area where the restoration was taking place.
Brick wall after restoration: As you can see the wall completed exceded our clients expatation and was a huge success.
 
This was a recent surface restortion project Atlantic Green Pro did in Hopewell New Jersey
Before This is the building as it looked when we arrived.
Before: The bricks were stained and covered with over 80 years of mold and dirt,
Before Because we use wet abrasive set-up and containment is a lot easier and faster than say sandblaing and or soda blasting
After This is the same fron after we restored the surface of the bricks.

BeforeThis is an area in the back of the building before we performed our surface restoration process.

After This is the same area in the back of the building after we restored it with our Farrow wet abrasive process which is super gentle on most any surface.
During the restoration process: Our Farrow wet abrasive process cleans bricks up very well.
After: As you can see our process cleans things up very nice.
Inside: Here you can see our process in use cleaning up the wood ceiling.
 
This was a recent surface restortion project Atlantic Green Pro did in the Hopewell / Princeton New Jersey

Before This is an old estate dating back more than 200 years, the home is being converted into a restaurant and Atlantic Green Pro was asked to come in and restore the brick and stone walls inside this building

Before: This is the area inside the building we performed the brick, stone and wood surface restoration

After: This is the back of a brick fireplace where we removed the plaster and paint from the bricks with our Farrow wet abrasive blasting system... we also restored the wood beams that were also painted over.
After This area had both plaster and paint on the walls, this is before the bricks and stones were repointed.
After: same area as above photo, just the other side of the room.
After: Again same room just another angle
After: This is the back wall, again it was paint and plaster and is now stone waiting for re pointing
 
Delaware River Estate Cast Iron Urns.
Before: This is came to us with years of white paint and rust.
After: This is the urn / plater after we performed our surface restoration
Before: Our client tried to remove the paint with chemicals... without any success.
After: This is the iron work after we perfrormed our surface restoration
 
Fiberglass car restoration.
Before This was a recent Corvette restoration we did.
After: Here you can see Corvette after we removed the paint
Before Again another angle of the Corvette
After: And what the Corvette looked like after we were done.
Note how clean the ground is.
 

Cemetery graffiti removal project Egg Harbor City Nj.

here's one nobody appreicates. While watch the evening new one evening we saw a spot on where this cemetery was vandalize by graffiti and the city didn't have a solution on removing it. We knew right a way we could help them out and we volenteered our services.

Before Graffiti removal
During Graffiti removal note how clean the process is and that there is very little to NO DUST from the process.
Before Graffiti removal
During Graffiti removal again note how very little to NO DUST from the process.
After Graffiti removal very delicate on limestone surfaces
Before Graffiti removal
During Graffiti removal note how clean the process is and that there is very little to NO DUST from the process.

 

 

 

Click on the +1 to like page.


Atlantic
Green Pro Home


About Atlantic Green Pro


Commercial

Residential

Municipal and Government


Historic Restoration

Graffiti removal
Historic Restoration
Auto restoration
Building exteriors
Building interiors
Cast iron radiators
Surface restoration
Sculptures restoration
Monument restoration
Cemetery restoration
Bridges restoration
Fire & Flood Restoration

Transportation and Highways

Marine, Boats and Marinas


Construction Equipment

Green Clean Press

Contact Atlantic Green Pro

Surfaces Restored

Stone
Brick
Concrete
Portland cement
Stucco
Stamped cement
Asphalt
Steel
Aluminum
Iron
Bronze
Brass
Cast metals
Fiberglass
Composites
Plastics
Wood

Call us at
(609) 217-8494

Click here to send an email
to AtlanticGreenPro

 

Stone house cleaning

Before Farrow Process


After Farrow Process


Interior paint stripping


Before Farrow Process


After Farrow Process


Varnish removal


Before Farrow Process


After Farrow Process


Limestone pillar cleaning


Before Farrow Process


After Farrow Process


Wood beam cleaning


Before Farrow Process


After Farrow Process


Antique paint removel


Before Farrow Process


After Farrow Process

 

 

 


Serving New Jersey, Delaware, Pennsylvania, New York and Maryland

Atlantic Green Pro Home   |   About AtlanticGreenPro   |   Commercial   |   Residential   |   Municipal and Government   |   Historic Restoration
Transportation and Highways   |   Marine, Boats and Marinas   |   Construction Equipment   |   Green Clean Press   |   Contact Atlantic Green Pro